[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Rollei] SL 35 E question
- Subject: Re: [Rollei] SL 35 E question
- From: Bob Shell <bob >
- Date: Fri, 11 May 2001 15:46:21 -0400
I used to repair these when they were current. I still have one out of
The lens diaphragm should be all the way open when the lens is mounted on
the camera. If the lens does not do this off the camera, then the plate in
the camera which pushed on the pin on the lens to close the diaphragm may
be bent or the lens may be messed up. You'd need another body or lens
to tell which has the problem.
If the camera will not fire in the X position, it has problems. If it
will fire on X but not the other speeds, it either needs a new battery
or the battery contacts are dirty (unless someone has been mucking around
inside it). If it won't fire on X at all, then it has some real internal
problem, most likely in the shutter.
> From: Andrei.Calciu
> Reply-To: rollei us
> Date: Fri, 11 May 2001 14:59:00 -0400
> To: rollei us
> Subject: [Rollei] SL 35 E question
> does anybody know where to find an online manual for this camera. There are
> a couple of features that elude me.
> One is the fact that on automatic diaphragm mode, the blades on my f/1.8
> lens close to f/2 is this deliberate to allow the meter to measure on a f/2
> lens? Otherwise, the lens mechanics are impeccable.
> Also, the camera fired a couple of times and stopped releasing the
> shutter/mirror. Any easy fix?