[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Rollei] External Power Supply for 3003
- Subject: Re: [Rollei] External Power Supply for 3003
- From: "Dr Adam Bujak" <adambujak >
- Date: Sat, 12 Jan 2002 20:03:59 -0500
- References: <B865AE75.A42%bob >
The official name for this back is "MAINS CONNECTION" for external power
supply from a covenient DC voltage source (mains power unit with 6 V +- 0.5/
4 A DC output).
Rollei Fototechnic GmbH DEALER HANDBOOK lists this back as Extrenal Power
supply module cat # 207 060.
The back has the following inscription:
DC input ripple rejection equal or less 10mV
Voltage 6V +-0.5V
Current limited 4A
Attention to Polarity.
I have made several attempts over a dozen of years to find a ready power
supply in Canada without any success.
If someone could help me I would greatly appreciate it.
- -Dr. Adam Bujak
- ----- Original Message -----
From: Bob Shell <bob >
Sent: Saturday, January 12, 2002 9:12 AM
Subject: Re: [Rollei] External Power Supply
> on 1/12/02 8:00 AM, Reg Ronaldson at reg.ronaldson wrote:
> I don't have the Rollei part numbers. There is what is basically a dummy
> battery with a mini-phone socket in the end. You can plug an external
> battery holder into this with a cable. In theory you can also hook up
> a mains adapter this way, but whether Rollei actually makes this part
> to be in question. Certainly they did at one time. I would suspect that
> an AC power supply from someone like Radio Shack could be made to work so
> long as the output voltage was right.
> Maybe someone on the list has actually done this. I made an external
> adapter for my 3003 camera when I was using that system years ago, and it
> was all from off-the-shelf Radio Shack parts.